|
The TS101 is an ideal platform for evaluating Xilinx Spartan-3 FPGAs.
The Circuit Design Learning Tool TD-BD-TS101 is a toolkit for
efficiently learning how to design circuits using HDL. The toolkit is
based on a Xilinx Spartan-3 (XC3S400-4PQ208) mounted on
board as the main unit.
The main unit carries an RS-232C connector for communication
with an external device. By using the toolkit in combination
with your PC, you can easily check the boards I/O operations to
learn circuit designing.
This product comprises the main unit, AC adapter, documents,
and CD-ROMs. On board, four channels of AD/DA converter, 32
bits of flash ROM, and 64 Mb of SDRAM extend the use of the
evaluation board for several kids of circuit design.
You can program your designed circuit (test circuit) into onboard
PROM through the parallel cable from your PC. After the
data is written into PROM, re-supply the power or push the configuration
button. Transfer test circuit data from the PROM to the
FPGA (for configuring the FPGA) and execute the test circuit. Also,
you can directly configure the bit file to the FPGA.
Features
- Xilinx® XC3S400-4PQ208
- Xilinx XCF02SVO20C
- Seven-segment LEDs (4)
- LED
- Push switch
- DIP switch
- Four channels, 10-bit analog-to-digital converter
- Four channels, 10-bit digital-to-analog converter
- 32 Mb flash ROM (2M x 16 bits)
- 64 Mb SDRAM (4M x 16 bits)
- Interfaces:
- Parallel port
- Serial port
- JTAG
- Expansion connector (20 pin [12 signals])
For more information, visit the
HiTech Global Distribution, LLC website at
www.hitechglobal.com/ted/ts101.htm.
Printable PDF version of this article with graphics.  (4/18/05) 170 KB |
